Delete Job
Deletes the job from the specified slot in flash memory on the In-Sight sensor.
- The In-Sight sensor must be Offline.
- This command only works on a job saved on the flash memory on the In-Sight vision system. If the job is stored on the configured Job Server or the SD Card installed to the In-Sight vision system, this command does not work.
Delete Job Inputs
Syntax: DJ[ID]
Parameter | Description |
---|---|
ID |
The job ID number (0 to 999). |
Delete Job Outputs
Returns a status code, followed by a line terminator. The status codes are:
Status Codes | Description |
---|---|
1 |
The command was executed successfully. |
0 |
Unrecognized command. |
-1 |
The job ID number is outside the allowable range (0 to 999). |
-2 |
The job could not be deleted, the sensor is Online, or the job slot is empty, therefore the command could not be executed. |
-6 |
User does not have Full Access to execute the command. |
Delete Job Example
To delete the job "Test.job" from slot 0 on the In-Sight sensor, issue the following command: DJ00Test.job
The In-Sight sensor responds on the following line with the status code of 1, indicating that the job was deleted successfully.