SetFavorHostTable
Enables or disables the Favor Host Table over DNS option found in the In-Sight Host Table. For more information, see In-Sight Host Table Dialog.
SetFavorHostTable Inputs
Syntax: EV SetFavorHostTable(FavorHostTable)
Parameter |
Description |
---|---|
FavorHostTable |
0 = Disabled (default) 1 = Enabled |
SetFavorHostTable Outputs
Returns a status code, followed by the number of characters (in bytes) for the results, then the results in XML format. The status codes are:
Status Codes | Description |
---|---|
1 | The command was executed successfully. |
0 | Unrecognized command. |
-2 | The command could not be executed. |
-6 | User does not have Full Access to execute the command. For more information, see User Access Settings Dialog. |
SetFavorHostTable Example
To enable the Favor Host Table over DNS option, issue the following command: EV SetFavorHostTable(1)
After issuing the SetFavorHostTable command, the In-Sight sensor responds with a status code (1), followed by the number of characters, in bytes (18). Finally, the results in XML format.