WriteCCLinkWordBuffer
Writes data from a referenced Buffer structure, created bythe FormatOutputBuffer function,to the CC-Link network using the CC-Link protocol upon on an Event trigger.For more information, see FormatOutputBuffer and Communicating with a Mitsubishi Automation Controller on a CC-Link Network via an In-Sight CIO-MICRO-CC I/O Module.
Note:
- This function is only available on In-Sight vision systems running In-Sight firmware 4.x.x, and is not available on In-Sight vision systems running In-Sight firmware 5.1.0 and later. For a complete list of models and supported firmware versions, see Firmware Versions.
- CC-Link is only available on In-Sight vision systems using In-Sight firmware 4.x.x, and is not available on In-Sight vision systems running In-Sight firmware 5.1.0 and later. For a complete list of models and supported firmware versions, see Firmware Versions.
- The In-Sight vision system must be connected to an In-Sight CIO-MICRO-CC I/O module to enable this functionality. For more information, see I/O Module Configuration.
- When an In-Sight vision system is configured to communicate with a Mitsubishi Automation Controller over CC-Link, the protocol only supports the transfer of data between the vision system and the automation controller.
WriteCCLinkWordBufferInputs
Syntax: WriteCCLinkWordBuffer(Event,Buffer)
Parameter | Description |
---|---|
Specifies the event on which to write thespecified Buffer data structure. This parameter must be a reference to one of the following:
|
|
Specifies a reference to a Buffer data structurecreated by a FormatOutputBufferfunction, which contains automatically formatted data. Note: The maximum length for output data is 256 bytes.
|
WriteCCLinkWordBufferOutputs
Returns |
The number of elements written or #ERR:
|