Connect an RS-232 Serial Cable (Optional)
To connect the vision system to a serial device, plug an RS-232 serial cable (DB9 connector) into the I/O module’s RS‑232 port and then connect the other end of the cable to the serial device. To secure the cable to the I/O module, tighten the connector screws.
Note: When you configure the In-Sight 7000 series vision system for use with the CIO-MICRO or CIO-MICRO-CC I/O module, the RS-232 TRANSMIT and RS-232 RECEIVE pins on the Breakout cable are disabled. To connect to a serial device, use the I/O module's RS-232 port (DB9).
