Establish a Unicast Implicit Connection - In-Sight 4.8.0 - 4.9.x Firmware

If the vision system has In-Sight 4.8.0 - 4.9.0 firmware version installed, the following steps must be taken to transfer data between the In-Sight vision system and a ControlLogix or CompactLogix PLC on an EtherNet/IP network.

1. Install the Add-On Profile (AOP) version 1.26.1, which will install Major Revision 10. For more information, see Establish the Connection Using the Add-On Profile.
2. Establish the connection using the Add-On Profile (AOP). For more information, see Establish the Connection Using the Add-On Profile.

---

Copyright © 1999 - 2019  |  Cognex Corporation  |  All Rights Reserved.

In-Sight® Explorer Help  |  2019 August 24  |  Revision: 5.7.4.3