S-Mount/M12 Manual Focus Accessories

Note:
  • The following S-Mount/M12 lenses are supported. If a different lens is used, the following restrictions apply:
    • At infinity focus, the back focal length must be greater than 5.5mm.
    • Close up, the back focal length of the lens cannot be greater than 13mm.
  • The DataMan clear cover accessory (DM300-CLCOV) is supported with In-Sight S-Mount/M12 manual focus lenses and provides an IP65 rating.
  • For the In-Sight 7905, the vision system image circle is larger than the S-Mount/M12 lenses used in the autofocus module (ISAF-7000-8mm) and the S-Mount/M12 adapter kit (ISLN‑7000‑SMNT), resulting in mechanical vignetting in the image when using any S-Mount/M12 lens. Therefore, S-Mount/M12 lenses are not recommended. For more information, see Mechanical Vignetting.
Accessory Part Number Accessory Image

6mm M12 lens

 LM12‑06‑01

8mm M12 lens

 LM12‑08‑01‑F2.2

12mm M12 lens

 LM12‑12-01‑F2.3

16mm M12 lens

 LM12‑16‑01
25mm M12 lens LM12‑25‑01

S-Mount/M12 adapter kit:

  • S-Mount/M12 adapter
  • 13mm lens locking cone (P/N 1000000178)
  • 14mm lens locking cone (P/N 372-1270R)
  • Installation tool
Note: The S-Mount/M12 adapter kit (ISLN-7000-SMNT) is required when installing In‑Sight S-Mount/M12 manual focus lenses.
 ISLN‑7000‑SMNT

Clear cover DM300‑CLCOV