EditAnnulus
Inserts an interactive annulus control into the spreadsheet. When the control is clicked, the display switches to Interactive Graphics Mode, where the position and size of the annulus can be adjusted. For more information, see Interactive Graphics Mode.
- To access the property sheet for EditAnnulus, right-click the EditAnnulus control and select Edit Function.
- If the External Region parameter (e.g. ExtractBlobs function) references an EditAnnulus function whose Internal Radius parameter is set to zero, #ERR may be returned. In this circumstance, use an EditCircle function instead of the EditAnnulus function. For more information, see EditCircle.
EditAnnulus Inputs
Syntax: EditAnnulus(Image,Fixture.Row,Fixture.Column,Fixture.Theta,Move,Size,Name,Show)
EditAnnulus Outputs
Results |
A result table will automatically be created in the cells adjacent to the right of the EditAnnulus control. |
EditAnnulus Vision Data Access Functions
The following Vision Data Access functions are automatically inserted into the spreadsheet to create the result table. For more information, see Structures.
Row |
GetRow(Annulus) |
The row offset of the center of the annulus, in image coordinates. |
Col |
GetCol(Annulus) |
The column offset of the center of the annulus, in image coordinates. |
Inner Radius |
GetRadius(Annulus, 0) |
The inner radius of the annulus. |
Outer Radius |
GetRadius(Annulus, 1) |
The outer radius of the annulus. |