Set IP Address Lock
Prevents unauthorized changes to an In-Sight sensor's IP address.
Set IP Address Lock Inputs
Syntax: SL[Int]
Parameter | Description |
---|---|
Int |
|
Set IP Address Lock Outputs
Returns a status code. The status codes are:
Status Codes | Description |
---|---|
1 |
The command was executed successfully. |
0 |
Unrecognized command. |
-1 |
The value given for Int is either out of range or is not a valid integer. |
-2 |
The command could not be executed. |
-6 |
User does not have Full Access to execute the command. For more information, see User Access Settings Dialog. |
Set IP Address Lock Example
To lock the sensor's IP address, issue the following command: SL1
The In-Sight sensor responds with a status code of 1, indicating that the IP address was successfully locked.