Event
Updates the spreadsheet on the specified event trigger. The Event function is used as a critical dependency in causing the spreadsheet to update only on specific input/output conditions.
Event Inputs
Parameter | Description | ||
---|---|---|---|
Trigger | Specifies a trigger source for the event
when the In-Sight sensor is Online. |
||
16 |
Acquisition Error |
Generated when an ERR:
Missed Acquisition output is sent, or when a vision system loses communication. Note: The Trigger
parameter in the AcquireImage property sheet must be set to Camera
to use this trigger.
|
|
17 |
Discrete I/O Error |
Generated when a tracking pulse overrun occurs, or the tracking pulse queue is full. |
|
18 |
Serial Port 0 Error |
Not implemented. |
|
19 |
Serial Port 1 Error |
Not implemented. |
|
20 |
Spreadsheet Error |
Generated when a #ERR is returned in a cell for the first time during job execution. |
|
21 |
System Error |
Not implemented. |
|
22 |
Network Error |
Generated when using the:
|
|
32 |
Manual |
Generated when a manual trigger is initiated with the vision system Online. |
|
33 |
Online/Offline |
Generated when an In-Sight vision system switches between Online/Offline states. |
|
35 |
Job Load Done |
Generated after a job is loaded. |
|
39 |
Acquisition Job Complete |
Generated at the end of acquisition-initiated job execution. Note: The Trigger
parameter in the AcquireImage property sheet must be set to Manual
to use this trigger.
|
|
49 to 60 |
Discrete 0 to 11 |
Generated
when the corresponding discrete input is configured as an Event
Trigger, and the specified signal activity (i.e. Rising Edge, Falling
or both) occurs. |
|
64 |
Serial port 0 |
Not implemented. |
|
65 | Serial port 1 |
Generated when the serial port is configured
for either DeviceNet
or Text
Mode, and data is received on the serial port. |
|
80 to 87 |
Soft 0 - 7 (default = Soft 0) |
Generated when a SetEvent, Button or Timer function, or a Set Event or Set Event and Wait Native Mode command, soft trigger is executed. |
|
135 | Tune Button | Generated when the Tune button on the In-Sight 7000 Gen2 series vision system or In-Sight 9000 series vision system is pressed. | |
Manual |
Specifies whether manual triggering is issued when the event is triggered while the In-Sight vision system is Offline. |
||
0 |
OFF (default) |
Manual triggering is not issued. |
|
1 | ON |
Manual triggering is issued. |
Event Outputs
Returns |
An Event data structure, or #ERR if any of the input parameters are invalid. |