In-Sight 5000 Series I/O Lines

Note:
  • HS OUT 0 and HS OUT 1 are built-in high-speed outputs, direct from the vision system.
  • The vision system supports the Strobe signal type for the HSOUT 1 line.
  • The In-Sight 5604 line scan vision system does not support the Strobe signal type.

Direct / CIO-1350

Output Name
0 HSOUT 0
1 HSOUT 1
4 Green LED
5 Red LED

CIO-1400

Input Name
1 Line 1
2 Line 2
3 Line 3
4 Line 4
5 Line 5
6 Line 6
7 Line 7
Output Name
0 HSOUT 0
1 HSOUT 1
2 Line 2
3 Line 3
4 Line 4
5 Line 5
6 Line 6
7 Line 7
8 Green LED
9 Red LED

CIO-1450

Note: When Pulsed discrete outputs are sent from a CIO-1450 I/O Module, the pulse width may be 10 milliseconds longer than specified.
Input Name
0 Line 0
1 Line 1
2 Line 2
3 Line 3
4 Line 4
5 Line 5
6 Line 6
7 Line 7
Output Name
0 Line 0
1 Line 1
2 Line 2
3 Line 3
4 Line 4
5 Line 5
6 Line 6
7 Line 7
8 HSOUT 0
9 HSOUT 1
10 Green LED
11 Red LED

CIO-1460

Note: When power is cycled on a CIO-1460 I/O module, discrete outputs may fire for approximately 250 microseconds during initialization.
Input Name
0 Line 0
1 Line 1
2 Line 2
3 Line 3
4 Line 4
5 Line 5
6 Line 6
7 Line 7
Output Name
0 Line 0
1 Line 1
2 Line 2
3 Line 3
4 Line 4
5 Line 5
6 Line 6
7 Line 7
8 HSOUT 0
9 HSOUT 1
10 Green LED
11 Red LED
12 Disabled
13 Disabled

CIO-MICRO/CIO-MICRO-CC

Note:
  • The CIO-MICRO I/O module supports In-Sight 5705, 5705C, 5715 with firmware version 5.3.0 and higher.
  • The CIO-MICRO & CIO-MICRO-CC I/O modules support In-Sight 5100 series and 5400 series vision systems with 128MB non-volatile flash memory or higher. Models can be identified by the Type number (821-xxxx-xx). The Type number is located on the label affixed to the vision system. For a complete list of models and supported firmware versions, see Firmware Versions.
Input Name
0 Line 0
1 Line 1
2 Line 2
3 Line 3
4 Line 4
5 Line 5
6 Line 6
7 Line 7
Output Name
0 Line 0
1 Line 1
2 Line 2
3 Line 3
4 Line 4
5 Line 5
6 Line 6
7 Line 7
8 HSOUT 0
9 HSOUT 1
10 Green LED
11 Red LED