In-Sight 7000 Gen2 Series Light Settings

The In-Sight 7000 Gen2 series vision system supports connecting an integrated illumination accessory to the vision system's faceplate and connecting an external light to the vision system's LIGHT connector, but does not support using both lighting devices simultaneously. For a complete list of supported accessories, refer to the In-Sight® 7000 Gen2 Series Vision System Reference Guide.

If an integrated illumination accessory is installed to the vision system's faceplate, the Light Settings dialog can be used to specify the light settings for the LED ring light.
If an external light is connected to the vision system's LIGHT connector, the Light Settings dialog can be used to specify the light settings for the external strobe or continuous lighting device.

Note: If the IntegratedLightControl or ExternalLightControl function is inserted into the spreadsheet and you attempt to modify settings in the Light Settings dialog, the settings specified in the dialog will be overwritten by the spreadsheet function. For more information, see IntegratedLightControl and ExternalLightControl.