Breakout Cable
The Breakout cable provides connections to an external power supply, the acquisition trigger input, general-purpose inputs and high-speed outputs. The Breakout cable is not terminated.
|
||
|---|---|---|
| Pin# | Signal Names |
Wire Color |
| 1 | IN 2 / HSOUT 2 | Yellow |
| 2 | UNUSED | White/Yellow |
| 3 | UNUSED | Brown |
| 4 | IN 3 / HSOUT 3 | White/Brown |
| 5 | IN 1 | Violet |
| 6 | COMMON IN | White/Violet |
| 7 | +24VDC | Red |
| 8 | GND | Black |
| 9 | COMMON OUT | Green |
| 10 | TRIGGER | Orange |
| 11 | HSOUT 0 | Blue |
| 12 | HSOUT 1 | Grey |
Note:
- Cables are sold separately.
- Perform wiring or adjustments to I/O devices when the vision system is not receiving power.
- You can cut exposed wires short or trim wire ends. You also can tie the wires back if you use a tie made of non-conductive material. Keep bare wires separated from the +24VDC wire.
- If using an integrated or external illumination accessory, the 10 meter and 15 meter Breakout cables are not supported.
- When using the 15 meter Breakout cable, full 24VDC voltage must be maintained at the input leads of the Breakout cable when the vision system is operating.