Content Summary
Download the Trevista CI Dome Line Scan Getting Started for information on using the Trevista Dome with a line-scan camera and VisionPro software.
The Trevista CI Dome Line Scan Getting Started provides detailed instructions on hardware components, software installation, and integration for using the Trevista Dome and line-scan camera. It covers topics such as encoder configuration, mounting orientation, image calibration, and regulatory compliance to maximize the effectiveness of Cognex's computational imaging technology.
Table of Contents:
- Legal Notices
- Table of Contents
- Precautions
- Symbols
- Introduction
- Module Components
- Trevista Dome
- Controller
- Encoder
- Industrial PC
- Hardware Connections
- Software Installation
- Install VisionPro
- Set IP Address for Controller Adapter
- Launch QuickBuild
- Integration Notes
- Prerequisites
- Encoder Installation
- Mounting and Mechanical Configuration
- Preparing Part for Calibration
- Getting Good Initial Image
- Checking Trevista Dome Mounting Orientation
- Encoder Settings
- Adjusting Final Image
- Troubleshooting
- Checking First Pixel Orientation
- Lightning Orientation Check
- Mirrored image
- High-Frequency Encoder Signals
- Regulations and Conformity
- 中国大陆RoHS (Information for China RoHS Compliance)
- For European Community Users