Content Summary
Version 1.31.08 introduces support for Cognex's latest In-Sight systems, including the L38 Series, alongside a comprehensive range of other In-Sight series such as 2000, 2800, 3800, and D900. Additionally, it supports DataMan products like the 60, 260, and 8700 Series. For newer DataMan models, existing AOPs can be adapted by disabling electronic keying. Installation guidance is provided in the Integration of RSLogix and In-Sight guide, covering camera installation, updates, data exchange, and I/O references.
1.31.08 adds support for the latest Cognex releases – In-Sight L38 Series
Supports all the below In-Sight systems:
- In-Sight L38 Series
- In-Sight 2000 Series
- In-Sight 2800 Series
- In-Sight 3800 Series
- In-Sight D900 Series
- In-Sight 5700 Series
- In-Sight 7900_7500 Series
- In-Sight 8000 Series
- In-Sight 9000 Series
- In-Sight VC200 Series
- In-Sight 500 Series
- In-Sight 7000 Series (added Maj Rev 12)
- In-Sight 5000 Series (added Maj Rev 12)
- In-Sight 3400 Series
- In-Sight 1700 Series
- In-Sight Micro Series (added Maj Rev 12)
- In-Sight 3D-L4000 Series
The following DataMan products are also supported:
- DataMan 60 Series
- DataMan 200, 260 Series
- DataMan 300 Series
- DataMan 400 Series
- DataMan 500 Series
- DataMan 8000, 8700 Series
Note: To support any newer DataMan models such as the DataMan 290 & DataMan 390 Series, you can select any existing DataMan AOP and disable electronic keying.
Detailed information for installing the AOP is contained in the Integration of RSLogix and In-Sight guide. This guide includes:
- How to install new cameras with the AOP.
- How to update cameras currently installed with EDS generated profiles over to use the AOP.
- How to send data back and forth between camera/PLC.
- Reference to the assembly I/O.