Content Summary
Version 1.33 of the AOP adds support for: Precision Time Protocol (PTP) on the IS3800 series & SystemValidated signal on the IS2800, IS3800, and L38.
Version 1.33 of the AOP adds support for:
- Precision Time Protocol (PTP) on the IS3800 series
- SystemValidated signal on the IS2800, IS3800, 3900 and L38
Version 1.33 supports all the In-Sight systems below:
- In-Sight 3900 Series
- In-Sight L38 Series
- In-Sight 2000 Series
- In-Sight 2800 Series
- In-Sight 3800 Series
- In-Sight D900 Series
- In-Sight 5700 Series
- In-Sight 7900_7500 Series
- In-Sight 8000 Series
- In-Sight 9000 Series
- In-Sight VC200 Series
- In-Sight 500 Series
- In-Sight 7000 Series (added Maj Rev 12)
- In-Sight 5000 Series (added Maj Rev 12)
- In-Sight 3400 Series
- In-Sight 1700 Series
- In-Sight Micro Series (added Maj Rev 12)
- In-Sight 3D-L4000 Series
The following DataMan products are also supported:
- DataMan 60 Series
- DataMan 200, 260 Series
- DataMan 300 Series
- DataMan 400 Series
- DataMan 500 Series
- DataMan 8000, 8700 Series
Note: To support any newer DataMan models such as the DataMan 290 & DataMan 390 Series, you can select any existing DataMan AOP and disable electronic keying.
Detailed information for installing the AOP is contained in the Integration of RSLogix and In-Sight guide. This guide includes:
- How to install new cameras with the AOP.
- How to update cameras currently installed with EDS generated profiles over to use the AOP.
- How to send data back and forth between camera/PLC.
- Reference to the assembly I/O.