Content Summary
To install DataMan 5.7.3 SR2 Firmware for DM50, DM60, DM70, DM150, and DM260: unzip the file, run the executable, which saves the firmware file into the DataMan Setup Tool folder. Version 5.7.3 SR2 addresses DM70 cable detection issues, adds NTP log entries, and enhances DataMatrix readability. Version 5.7.3 SR1 fixed Ethernet issues on DM260 and DM300/360, and improved image acquisition with varying Gain values. Use Setup Tool versions 6.1.x or 5.7.0 SR2.
Directions:
- Unzip the file.
- Run the executable.
- The executable will automatically save the firmware file into the DataMan Setup Tool firmware folder.
DataMan 5.7.3 SR2 Firmware for DM50, DM60, DM70, DM150, and DM260
5.7.3 SR2 changes/fixes:
- Bugfix related to DM70 alternate mode cable detection
- Adding status/warning device log entries for NTP (Network Time Protocol)
- Enhanced DataMatrix readability at high perspective (merge 5.7.3_CR2)
=====================================================================
5.7.3 SR1 changes/fixes:
- Intermittent Ethernet connectivity issues on DM260 and DM300/360 Series when directly wired to a PC
- Increased image acquisition times when using multiple Read Setups with widely varying Gain values
=====================================================================
DataMan 5.7.3 is a firmware-only release. Latest Setup Tool versions 6.1.x or 5.7.0 SR2 should be use with this firmware. This firmware consolidates DataMan fixed mount readers to one firmware version (See additional Installer downloads for DM300/360, and DM503).