Content Summary
To update to DataMan 5.7.3 SR2 Firmware for DM50, DM60, DM70, DM150, and DM260, unzip the file and run the executable to save the firmware automatically. Updates include fixing DM70 cable detection, adding NTP log entries, and improving DataMatrix readability. Previous SR1 updates addressed Ethernet issues with DM260/300/360 and increased image acquisition times under varied Read Setups. Use Setup Tool versions 6.1.x or 5.7.0 SR2 for installation.
Directions:
- Unzip the file.
- Run the executable.
- The executable will automatically save the firmware file into the DataMan Setup Tool firmware folder.
DataMan 5.7.3 SR2 Firmware for DM50, DM60, DM70, DM150, and DM260
5.7.3 SR2 changes/fixes:
- Bugfix related to DM70 alternate mode cable detection
- Adding status/warning device log entries for NTP (Network Time Protocol)
- Enhanced DataMatrix readability at high perspective (merge 5.7.3_CR2)
=====================================================================
5.7.3 SR1 changes/fixes:
- Intermittent Ethernet connectivity issues on DM260 and DM300/360 Series when directly wired to a PC
- Increased image acquisition times when using multiple Read Setups with widely varying Gain values
=====================================================================
DataMan 5.7.3 is a firmware-only release. Latest Setup Tool versions 6.1.x or 5.7.0 SR2 should be used with this firmware. This firmware consolidates DataMan fixed mount readers to one firmware version (See additional Installer downloads for DM300/360, and DM503).