Content Summary
Download the DataMan Configuration Codes manual for information on configuring and managing DataMan readers.
Download the DataMan Configuration Codes manual for information on configuring and managing DataMan readers.
Codes apply to various DataMan models (DM50, DM60, DM8000, MX-1000, MX-1502, DM8700, etc.), with specific compatibility noted per setting.
- Product Settings: Reboot scanner/base station, save settings.
- Reset: Factory reset for scanners and base stations.
- Disable Buttons: Trigger and tune button control.
- Diagnostics: Output diagnostic strings via RS-232/USB.
- Setup: Enable specific setup modes.
- Light Aimer: Control light/laser aimer.
- Trigger Types: Manual, presentation, external triggers.
- Custom Commands: Serial trigger and echo commands.
- Exposure Settings: Adjustable from 100µs to 25,000µs.
- Symbology Settings: Enable/disable 1D and 2D codes (DataMatrix, QR, Code128, UPC/EAN, PDF417, etc.).
- Training: Incremental training and untrained symbology options.
- Data Validation/Formatting: DoD UID validation, match strings.
- Wireless & Buffering: Pairing, offline buffering modes.
- Power Management: Hibernation, power-off timeouts.
- Keyboard Emulation: PS/2, ASCII command codes, iOS configuration.
- USB Settings: Modes, HID options, Ethernet over USB.
- Communications: DHCP, Ethernet/IP, PROFINET, ModbusTCP, SLMP.
- RS-232 Settings: Baud rate, parity, data bits, stop bits, handshaking.
- Network Settings: Enable/disable network client.
- Decode Settings: Prevent duplicate reads.
- Multi-Reader Sync: Enable/disable synchronization.
- Keyboard Layouts: Multiple languages supported.
- WebHMI Commands: Enable menus, set language.