Error ID codes
This table summarizes Error ID codes.
Bit | ID code | Description |
---|---|---|
0x 0 0 0 0 |
No Error | No error occurred. |
0x 0 1 0 0 |
Trigger set while disabled | Occurs when the Trigger bit is set while the Trigger Enable bit is cleared and the AcquireImage function's Trigger parameter is set to External, Network or Industrial Ethernet. |
0x 0 1 0 1 |
Trigger set while Offline | Occurs when the Trigger bit is set while the vision system is Offline. |
0x 0 4 0 0 |
Already Executing Error | Occurs when the Execute Command bit is set and the Executing bit is still High. |
0x 0 4 0 1 |
Job load requested while Online | Occurs when a Job Load command is issued while the vision system is Online. |
0x 0 4 0 2 |
Job load requested does not exist on the camera | Occurs when a JobID sent in the Command field does not exist as a prefix for any job in the camera file system. For example, if you send Command = 123, but there is no job on the camera which contains 123xxxxx.job. |