Plane3D

The Plane3D function allows you to create a fixtured 3D plane in the point cloud.

It returns a Plane3D structure containing the settings of the fixtured 3D plane.

Plane3D Inputs

The Plane3D function has the following syntax:

Plane3D(PointCloud,Fixture3D,ExternalFixture,Plane3D,Show)

Parameter Description

PointCloud

Reference to a cell containing a point cloud. The default value is $A$0.
Fixture3D

Specifies the point cloud coordinate system in which the 3D fixture is defined. It is offset from the PointCloud origin in the following format with the following arguments:

{X, Y, Z, Rotation, Tilt, TiltDirection}

X Offset on the X-axis from the PointCloud origin.
Y Offset on the Y-axis from the PointCloud origin.
Z Offset on the Z-axis from the PointCloud origin.
Rotation Specifies the in-plane rotation (in degrees) about the PointCloud Z-axis. The value range is -360 to 360. External references with values outside the allowed range will be normalized to the allowed range.
Tilt Specifies the tilt angle (in degrees) from the PointCloud Z-axis after rotation. The value range is 0-180. External references with values outside the allowed range will result in an error.
Tilt Direction Specifies the direction of tilt (in degrees) from the tool's rotated PointCloud X-axis, about the tool's PointCloud Z-axis. The value range is -360 - 360. External references with values outside the allowed range will be normalized to the allowed range.
Note: This parameter is available only if External Fixture is set to 0.
External Fixture

Specifies a reference to a Fixture3D structure defined in another cell to be used as the function's fixture. Set to 0 (OFF) to use the function's internal fixture instead.

Plane3D

Specifies the offset and the angle of the plane to use. It is offset from the Fixture3D origin in the following format with the following arguments:

{X, Y, Z, Tilt, TiltDirection}

X Offset on the X-axis from the PointCloud origin.
Y Offset on the Y-axis from the PointCloud origin.
Z Offset on the Z-axis from the PointCloud origin.
Tilt Specifies the tilt angle (in degrees) from the PointCloud Z-axis after rotation. The value range is 0-180. External references with values outside the allowed range will result in an error.
Tilt Direction Specifies the direction of tilt (in degrees) from the plane's rotated PointCloud X-axis, about the tool's PointCloud Z-axis. The value range is -360 - 360. External references with values outside the allowed range will be normalized to the allowed range.
Show

Selects the type of graphics to overlay on the image.

0 = hide all (default)

All graphics will be hidden, except when the cell containing the function is highlighted in the spreadsheet.

2 = input graphics only

The input data will be displayed at all times.

Plane3D Outputs

Returns

A Plane3D data structure containing the constructed 3D plane, or #ERR if any of the input parameters are invalid.

Results

When initially inserted into a cell, the following functions are automatically inserted into the spreadsheet to create a result table.

  X Y Z Tilt Tilt Direction
❒Plane3D GetX(Plane3D) GetY(Plane3D) GetZ(Plane3D) GetTilt(Plane3D) GetTiltDirection(Plane3D)

Plane3D Vision Data Access Functions

The following Structures 3D Vision Data Access Functions are automatically inserted into the spreadsheet to create the result table:

Function Description
GetX(Plane3D) Returns the X-axis coordinate of the 3D plane's center point.
GetY(Plane3D) Returns the Y-axis coordinate of the 3D plane's center point.
GetZ(Plane3D) Returns the Z-axis coordinate of the 3D plane's center point.
GetTiltDirection(Plane3D) Returns the constructed 3D plane's direction of tilt (in degrees) from the rotated Fixture3D X-axis about the Fixture3D Z-axis.
GetTilt(Plane3D) Returns the tilt angle of the constructed 3D plane (in degrees) on the Fixture3D Z-axis.