Adding a Sensor to the List
If the desired sensor is physically connected to the local network but does not display in the list, click the Refresh or Add button, depending on the sensor's network settings.
- The Refresh button updates the list to display all the In-Sight sensors that are connected to the local subnet.
- The Add button opens the Add Sensor/Device to Network dialog, which allows users with Full access to reconfigure the network settings of sensors on the local network. Once configured, the sensors are automatically added to the list and can be connected to.
If the desired sensor is on a different subnet, from the System menu, select Explorer Host Table to open the Explorer Host Table Setup dialog.