Light Controls
The Light Controls allow you to configure LED light banks and rings for In-Sight vision systems.
The Light Control Mode specifies whether the ring light on an In-Sight 5000 series or 70xx - 74xx series vision system is only ON for the duration of the specified exposure or is constantly ON. On (Exposure) enables the ring light to be ON only for the duration of the exposure. On (Continuous) enables the ring light to be always ON, reducing the strobe effect by keeping the LEDs lit at 50% intensity when not exposing an image.
Controls up to four (4) LED light banks on the In-Sight vision system.
- Horizontal enables the two Horizontal LED banks.
- Vertical enables the two Vertical LED banks.
- All enables both the two Horizontal and Vertical LED banks.
Controls the effective intensity of the LEDs. The light intensity will be saved with the job.
- In-Sight 70xx - 74xx series vision system: 0 to 100; default =1; OFF = 0.
Controls the gain of the amplifier stage that precedes the analog-to-digital converter.
In-Sight Model | Gain Settings |
---|---|
70xx - 74xx series |
0 to 7; default = 0 |
7500, 7501, 7600, 7600C, 7800, 7800C, 7801, 7801C, 7802, 7802C , 7900, 7900C, 7901, 7901C, 7902, 7902C | 0 to 6; default = 0 |
7902P, 7905, 7905C | 0 to 240; default = 60 |
9912, 9912C | 0 to 255; default = 60 |