Blobs Counting Tool - Range Limits Tab

Defines the maximum acceptable number of blobs to detect; the tool will create a Smart Limits default setting based on your image, which you can customize to suit the needs of your application.

Reports the current number of detected blobs (the blobs counted in the image are based on a numerical order where 0 = 1); values that fall exactly at, or between, the Minimum and Maximum settings are classified as a Pass.

Defines the minimum acceptable number of blobs to detect; the tool will create a Smart Limits default setting based on your image, which you can customize to suit the needs of your application.

Defines whether or not the Pass/Fail logic of the tool should be inverted (default = Off, unchecked):

• Unchecked - Standard results are applied, i.e. the tool result is a Pass if the feature was detected and falls within the specified settings.
• Checked - Inverts the results, i.e. the tool result is a Fail if the feature was detected and falls within the specified settings.

Defines the limits based on the Smart Limits settings. This button is useful when a parameter has been changed and the limits need to be adjusted, or the tool has been added and no limits have been defined.