Setting Up the Patterns Counting Tool

Once the tool has been added, you will need to configure the regions in the image that will define your pattern (the Model region), and where in the image the pattern will be found (the Search region).

Position the Model region over the pattern that will be used as the training model; make sure that the Model region only covers the important features of the pattern.
Position the Search region so that it covers the areas within the image where you expect the pattern to appear. To help the performance of the tool, create smaller Search regions; the larger the Search region, the longer it will take the tool to perform its inspection.

Note: The Model and Search regions cannot be bent into an arc or annular shape.
Press the OK button to confirm the regions (press the Cancel button to not add the tool to the job).
With the tool initially configured, load several images and adjust the tool's parameters, as needed, to compensate for your expected ranges of variations.
Finally, if desired, use the tool's Input/Output properties to share tool data between other tools and/or other external devices.