Edge Width Defect Detection Tool - Defects Tab
When the Defects tab is selected, the tool will display (using yellow lines) the minimum and maximum thickness of the detected edge pair, as well as any detected defects or gaps.
The region may also be selected and adjusted when in this tab.
![Closed](../../Skins/Default/Stylesheets/Images/transparent.gif)
Specifies that any width distance (0.001 - 1920; default = 3), in pixels, between detected edge pairs less than this value is not a defect.
![Closed](../../Skins/Default/Stylesheets/Images/transparent.gif)
Specifies that any width distance (0.001 - 1920; default = 1000), in pixels, between detected edge pairs greater than this value is not a defect.
![Closed](../../Skins/Default/Stylesheets/Images/transparent.gif)
Defines whether or not the tool will account for size defects (which account for the length along the edge); by default, this parameter is enabled.
![Closed](../../Skins/Default/Stylesheets/Images/transparent.gif)
Defines the minimum defect size (0.001 - 1920; default = 10), in pixels; continuous deviations from the best-fit line or circle which are less than this value are not considered defects.
![Closed](../../Skins/Default/Stylesheets/Images/transparent.gif)
Defines the maximum defect size (0.001 - 1920; default = 1000), in pixels; continuous deviations from the best-fit line or circle which are greater than this value are not considered defects.
![Closed](../../Skins/Default/Stylesheets/Images/transparent.gif)
Defines whether or not the tool will account for area defects; by default, this parameter is disabled. Area defects account for the length along the best-fit line or circle and how far the defective edge is from the best-fit line or circle.
![Closed](../../Skins/Default/Stylesheets/Images/transparent.gif)
Defines the minimum area defect (0.001 - 1000000; default = 10), in pixels; an area less than this value is not considered a defect.
![Closed](../../Skins/Default/Stylesheets/Images/transparent.gif)
Defines the maximum area defect (0.001 - 1000000; default = 1000000), in pixels; an area greater than this value is not considered a defect.