Bead Finder Defect Detection Tool - Edges Tab
When the Edges tab is selected, the tool will display the location of the bead path in blue, all detected edges in green and the Calipers that define the polyline path, generated from the bead path location, in aqua. The aqua colored Calipers may only be adjusted through the Polyline Width parameter.You can adjust the Polyline Width, Caliper Size, Caliper Spacing and Minimum Contrast parameters, as needed, to isolate the desired edges.
![Closed](../../Skins/Default/Stylesheets/Images/transparent.gif)
Defines the width of the Calipers used to define the polyline (1 - 1920; default = 25).
![Closed](../../Skins/Default/Stylesheets/Images/transparent.gif)
Defines the number of pixels, per Caliper, that are to be analyzed along the direction of the inspection (1 - 639; default = 5).
![Closed](../../Skins/Default/Stylesheets/Images/transparent.gif)
Defines the distance, in pixels, between the end of one Caliper and the start of the next Caliper (-1 - 639; default = 0).
![Closed](../../Skins/Default/Stylesheets/Images/transparent.gif)
Defines the pixel distance (1 - 10; default = 3) over which an edge transition takes place. This setting helps filter noise from the image.
![Closed](../../Skins/Default/Stylesheets/Images/transparent.gif)
Defines the minimum greyscale contrast transition (1 - 255; default = 10) to be considered an edge.
![Closed](../../Skins/Default/Stylesheets/Images/transparent.gif)
Displays the total number of Calipers within the region.
![Closed](../../Skins/Default/Stylesheets/Images/transparent.gif)
Defines which individual Caliper to isolate and display.
![Closed](../../Skins/Default/Stylesheets/Images/transparent.gif)
Defines whether or not all of the Calipers within the region are displayed at all times; by default, the Calipers are hidden.