Bead Tracker Defect Detection Tool - Defects Tab
When the Defects tab is selected, the tool will display graphics related to identifying and/or classifying errors in the part or object. The tool will display the location of the bead as a blue polyline, the minimum and maximum thickness of the bead with yellow lines and any detected defects and/or gaps.
![Closed](../../Skins/Default/Stylesheets/Images/transparent.gif)
Specifies that any width distance (0.001 - 1920; default = 3), in pixels, between detected edge pairs less than this value is not a defect.
![Closed](../../Skins/Default/Stylesheets/Images/transparent.gif)
Specifies that any width distance (0.001 - 1920; default = 1000), in pixels, between detected edge pairs greater than this value is not a defect.
![Closed](../../Skins/Default/Stylesheets/Images/transparent.gif)
Defines whether or not the tool will account for size defects (which account for the length along the edge); by default, this parameter is enabled.
![Closed](../../Skins/Default/Stylesheets/Images/transparent.gif)
Defines the minimum defect size (0.001 - 1920; default = 10), in pixels; continuous deviations from the polyline which are less than this value are not considered defects.
![Closed](../../Skins/Default/Stylesheets/Images/transparent.gif)
Defines the maximum defect size (0.001 - 1920; default = 1000), in pixels; continuous deviations from the polyline which are greater than this value are not considered defects.
![Closed](../../Skins/Default/Stylesheets/Images/transparent.gif)
Defines whether or not the tool will account for area defects; by default, this parameter is enabled. Area defects account for the length along the polyline and how far the defective edge is from the polyline.
![Closed](../../Skins/Default/Stylesheets/Images/transparent.gif)
Defines the minimum area defect (0.001 - 1000000; default = 10), in pixels; an area less than this value is not considered a defect.
![Closed](../../Skins/Default/Stylesheets/Images/transparent.gif)
Defines the maximum area defect (0.001 - 1000000; default = 1000000), in pixels; an area greater than this value is not considered a defect.