Inspect Part

The Inspect Part step is used to assemble and configure the Inspection Tools that will be used to build your job. Examine your part or object to be inspected and determine which types of features best lend themselves to your application’s requirements, and which Inspection Tools best suit themselves to solving your problem. For more information, see Features.

Note: The Links tab is not supported on the In-Sight 2000 series vision sensors.

Adding, Deleting and Editing Inspect Part Tools
Choosing Inspect Part Tools
Create Links Between Location and Inspection Tools

The Inspection tools return the following results:

In-Sight Models	Results
In-Sight 2000-110 and 2000-120/120C Vision Sensors	Pass/Fail status only
In-Sight 2000-130/130C Vision Sensors	Measurement and Counting Inspection tools: Standard Results (Numeric Data) Presence/Absence Pattern tool: Pass/Fail status and Pattern Score Other tools: Pass/Fail status only
In-Sight Vision Systems (All Models) and In-Sight 2000 Series 23X Vision Sensors (23M, 230)	Standard Results (No Limitations)

In-Sight Models

Results

In-Sight 2000-110 and 2000-120/120C Vision Sensors

Pass/Fail status only

In-Sight 2000-130/130C Vision Sensors

Measurement and Counting Inspection tools: Standard Results (Numeric Data)

Presence/Absence Pattern tool: Pass/Fail status and Pattern Score

Other tools: Pass/Fail status only

In-Sight Vision Systems (All Models) and In-Sight 2000 Series 23X Vision Sensors (23M, 230)

Standard Results (No Limitations)