Angle Measurement Tool - Range Limits Tab
![Closed](../../Skins/Default/Stylesheets/Images/transparent.gif)
Defines the maximum acceptable angle value; the tool will create a "Smart Limit" default setting based on your image, which you can customize to suit the needs of your application.
![Closed](../../Skins/Default/Stylesheets/Images/transparent.gif)
Reports the current measured angle between the two features; values that fall exactly at, or between, the Minimum and Maximum settings are classified as a Pass.
![Closed](../../Skins/Default/Stylesheets/Images/transparent.gif)
Defines the minimum acceptable angle value; the tool will create a "Smart Limit" default setting based on your image, which you can customize to suit the needs of your application.
![Closed](../../Skins/Default/Stylesheets/Images/transparent.gif)
Defines whether or not the Pass/Fail logic of the tool should be inverted (default = Off, unchecked):
- Unchecked - Standard results are applied, i.e. the tool result is a Pass if the feature was detected and falls within the Range Limits.
- Checked - Inverts the results, i.e. the tool result is a Fail if the feature was detected and falls within the Range Limits.
![Closed](../../Skins/Default/Stylesheets/Images/transparent.gif)
Defines the limits based on the Smart Limits settings. This button is useful when a parameter has been changed and the limits need to be adjusted, or the tool has been added and no limits have been defined.