Min/Max Points Measurement Tool - Edges Tab
When the Edges tab is selected, the tool will display all of the detected edges, outlined in dark green, within the region. You can adjust the Caliper Size, Caliper Spacing, Edge Width and Minimum Contrast parameters, as needed, to isolate the desired edges.
You may also choose to view all of the Calipers by enabling the Show All Calipers parameter.
The region may also be selected and adjusted while in this tab.
![Closed](../../Skins/Default/Stylesheets/Images/transparent.gif)
Defines the number of pixels, per Caliper, that are to be analyzed along the direction of the inspection (1 - 639; default = 5).
![Closed](../../Skins/Default/Stylesheets/Images/transparent.gif)
Defines the distance, in pixels, between the end of one Caliper and the start of the next Caliper (-1 - 639; default = 0).
![Closed](../../Skins/Default/Stylesheets/Images/transparent.gif)
Defines the pixel distance (1 - 10; default = 3) over which an edge transition takes place. This setting helps filter noise from the image.
![Closed](../../Skins/Default/Stylesheets/Images/transparent.gif)
Defines the minimum greyscale contrast transition (1 - 255; default = 10) to be considered an edge.
![Closed](../../Skins/Default/Stylesheets/Images/transparent.gif)
Displays the total number of Calipers within the region.
![Closed](../../Skins/Default/Stylesheets/Images/transparent.gif)
Defines which individual Caliper to isolate and display.
![Closed](../../Skins/Default/Stylesheets/Images/transparent.gif)
Defines whether or not all of the Calipers within the region are displayed at all times; by default, the Calipers are hidden.