Trigger |
Specifies a trigger source for the event
when the In-Sight sensor is Online. |
16
|
Acquisition Error |
Generated when an ERR:
Missed Acquisition output is sent, or when a vision system loses communication.
Note: The Trigger
parameter in the AcquireImage property sheet must be set to Camera
to use this trigger.
|
17
|
Discrete I/O Error |
Generated
when a tracking pulse overrun occurs, or the tracking pulse queue is full.
|
20
|
Spreadsheet Error |
Generated
when a #ERR is returned in a cell for the first time during job execution.
|
22
|
Network Error |
Generated when using the:
- TCPDevice
or WriteResult functions, and these functions have
received a socket error from a low-level network library.
- TCPDevice function
and a packet is received but cannot be handled because the job is being
executed.
- WriteFTP or WriteImageFTP functions and network parameter settings (Host Name, User Name, Password,
etc.) are invalid.
|
32
|
Manual |
Generated
when a manual trigger is initiated with the vision system Online.
|
33
|
Online/Offline |
Generated
when an In-Sight vision system switches between Online/Offline states.
|
35
|
Job
Load Done |
Generated
after a job is loaded.
|
39
|
Acquisition Job Complete |
Generated at the end of acquisition-initiated
job execution.
Note: The Trigger
parameter in the AcquireImage property sheet must be set to Manual
to use this trigger.
|
49 to 60
|
Discrete 0 to 11 |
Generated
when the corresponding discrete input is configured as an Event
Trigger, and the specified signal activity (i.e. Rising Edge, Falling
or both) occurs.
|
65 |
Serial port 1 |
Generated when the serial port is configured
for either DeviceNet
or Text
Mode, and data is received on the serial port.
|
80 to 87
|
Soft 0 - 7
(default = Soft 0)
|
Generated when a SetEvent,
Button or Timer function,
or a Set Event
or Set Event
and Wait Native Mode command, soft trigger is executed.
|
135 |
Tune Button |
Generated when the Tune button on the In-Sight 7000 Gen2 series vision system or In-Sight 9000 series vision system is pressed. |
Manual |
Specifies whether manual triggering is issued when the event is triggered while the In-Sight vision system is Offline.
|
0 |
OFF (default)
|
Manual triggering is not issued.
|
1 |
ON |
Manual triggering is issued.
|