Skip to Main Content
Cognex 支持中心
Logo

Upgrading your VisionPro/VPDL/ViDi system via FSU 

This article describes how to upgrade the license for your   VisionPro/VPDL/ViDi system via FSU 

2026/05/05

This page contains detailed instructions for how to generate Upgrade Request Files and upload Upgrade Files for your VisionPro, VisionPro Deep Learning, or ViDi systems. These upgrades are applied to the dongle that you previously purchased from Cognex.

An overview of the process is here: What is the Field Service Update Process (FSU)

A Cognex support case will have been created when you placed your order. 
You can open the case in MyCognex by navigating to “My Support Cases” and selecting the case containing the order number in the title. 
You will use this case to upload your Upgrade Request File and download your Upgrade File. The steps below outline the process:

  1. The Upgrade Request file will have the extension .WibuCmRaC (RaC). You can generate the RaC file for your dongle by following the steps below:
    1. Open CodeMeter Control Center.
    2. Click the refresh icon to check for Firmware Update.
    3. If prompted, update Firmware.
    4. After the firmware update is complete, click on “License Update”.
    5. Click “Next”.
    6. Select “Create license request” and click Next.
    7. Select “Extend existing license” and click Next.
    8. Select “Cognex Corporation (6000417)” and click Next.
    9. Click “Commit”.
    10. This will generate the RaC file.
  2. Navigate to your case in MyCognex. Click the paper clip icon and select your RaC file, then click Send to attach it to the case.

    fsu-doc2-img1
  3. Once processing is complete, Cognex Support will notify you via email or case comment that your Upgrade File is ready for download. This file will have the extension .WibuCmRaU (RaU). Please navigate to your case and download that file.
  4. Follow these instructions to apply the RaU file to the dongle and complete the upgrade:
    1. Open CodeMeter Control Center.
    2. Click the “License Update” button.
    3. A dialog called “CmFAS Assistant” will pop up.  Click the “Next” button.
    4. On the next dialog, select “Import license update” and click “Next”.
    5. On the next dialog, type in the filename of the license update file from step (1).  Click “Commit”.
    6. The RaU file has now been applied to the dongle.

 

 If you don’t receive an upgrade file, or receive an error when applying the file, please create an additional case on MyCognex referencing the case number of the problematic upgrade.

相关资源