Set Up Image
The Set Up Image step is used to acquire or load an image, adjust the In-Sight sensor's acquisition settings, and, if your application requires results in real world units, such as millimeters or inches, you can calibrate the image's pixel coordinates.
- Acquiring or Loading an Image
- Adjusting the Acquisition Settings
-
Calibrating the Image to Real World Units
Note: This topic describes the calibration feature when connected to an In-Sight vision system. If connected to an In-Sight 2000-130/130C or In-Sight 2000 series 23X vision sensor, refer to the Field of View (Width) section of Image Settings.