Sequential N Point Calibration Tool - Settings Tab

ClosedNumber of Points

Defines the number of points to be acquired (2 to 16; default is 12).

ClosedReset

Resets the acquisition count to 0.

ClosedOnline Reset

Defines whether or not the acquisition count should be reset when the In-Sight vision system is placed Online. By default, this option is disabled (unchecked).

ClosedJob Load Reset

Defines whether or not the acquisition count should be reset when the job file is loaded. By default, this option is enabled (checked).

ClosedFile Name

Defines the calibration file name (default name is Default).

ClosedFull Name

Displays the full file name of the calibration file which appears in the Set Up Image step when the Calibration Type is configured to Import. The file must be exported before appearing in the Set Up Image step.

ClosedExport

Exports the calibration file to the In-Sight vision system's local file system.

ClosedAuto Export

Defines whether or not the calibration file should be automatically exported on the first trigger after the job file is loaded or an image is acquired. When enabled (checked), the tool will automatically export its calibration file on the first trigger after the job file is loaded or an image is acquired (by default this setting is disabled/unchecked).

Note: If Auto Export is enabled, the job file containing the calibration data must first be saved before the calibration file will be exported. If after saving the job file the calibration file does not appear in the In-Sight Files pane, click on another In-Sight vision system or emulator and then return and select the desired vision system. The file should now appear.
ClosedResult

Displays the tool's Pass/Fail status.

Copyright © 2008 - 2019  |  Cognex Corporation  |  All Rights Reserved.

EasyBuilder Help  |  2019 August 24  |  Revision: 5.7.4.3