Setting Up the Sequence Math & Logic Tool
Once the tool has been added, you will need to configure the parameters of the tool.
- Configure the settings in the General tab to suit your application.
-
Click on the Settings tab, and configure the parameters to suit your application.
Note: To tie the execution of a Group Math & Logic Tool and a Sequence Math & Logic Tool together, the Expression of the Group Math & Logic Tool must be constructed using the Sequence Math & Logic Tool's Current_Step symbol: e.g. Group_1.Enable=Sequence_1.Current_Step=1 - With the tool initially configured, load several images and adjust the tool's parameters, as needed, to compensate for your expected ranges of variations.
- Finally, if desired, use the tool's Input/Output properties to share tool data between other tools and/or other external devices.