Inputs: Turning Location and Inspection Tools On and Off
Location and Inspection tools may have their tool execution tied to an input line. Tying the tool to an input allows a control system, such as a PLC, to determine which tools should run.
- Select an input line, and set the Signal Type to User Data.
- Go to the Location or Inspection Tool that you would like to control, and go to the tool's Tool Enable control. From the drop-down list, select the Input number that you defined in the step above.
- The tool can now be turned On or Off (a HIGH signal (1) is On; a LOW signal (0) is Off) by the control system.