Outputs: Setting a Line to a Location or Inspection Tool Result
To send a signal based upon the result of a Location or Inspection Tool:
- Select an output line and set the Signal Type to Job Result.
- From the Job Result drop-down, select a tool result to output. The tool results listed (e.g. Text_1, Pattern_1, etc.) represent an overall Pass/Fail for the individual tool. The Job results are a cumulative Pass/Fail for all of the tools. The signal will be HIGH (1) when the tool result is Pass, and LOW (0) when Fail.
- Press the Details button to specify the pulse length and acquisition delay. If these settings are not specified, the signal will not be pulsed.