Choosing Inspect Part Tools
The Inspect Part tools are grouped by types of inspections:
The Presence/Absence Tools are used to qualify whether or not a feature is present or absent in the image.
Presence/Absence Tools | In-Sight Vision Systems (5.x.x and later firmware) |
In-Sight 2000-110 | In-Sight 2000-120/120C | In-Sight 2000-130/130C |
In-Sight 2000-230/230C In-Sight 2001-230/230C |
In-Sight 2000-23M |
---|---|---|---|---|---|---|
X | X | X | X | X | ||
X | X | X | X | X | ||
X | ||||||
X | ||||||
X | X | X | X | X | X | |
X | X | X | X | X | ||
X | X | X | X | |||
Blob1 |
X | X | ||||
X | X | |||||
X | X | X | X | |||
X | X | X | X | |||
X | X | |||||
1In-Sight 5.x.x and later firmware only. 2Monochrome models only. 3Color models only. |
The Measurement Tools are used to measure distances, diameters, angles and area of features in the image.
Measurement Tools | In-Sight Vision Systems | In-Sight 2000-110 | In-Sight 2000-120/120C | In-Sight 2000-130/130C |
In-Sight 2000-230/230C In-Sight 2001-230/230C |
In-Sight 2000-23M |
---|---|---|---|---|---|---|
X | X | X | X | |||
X | X | X | X | |||
X | X | |||||
X | X | |||||
X | X | |||||
X | X | |||||
X | X | X | X | |||
X | X | |||||
X | X | X | ||||
X | ||||||
1Monochrome models only. 2Color models only. |
The Counting Tools are used to count types of features in the image.
Counting Tools | In-Sight Vision Systems | In-Sight 2000-110 | In-Sight 2000-120/120C | In-Sight 2000-130/130C |
In-Sight 2000-230/230C In-Sight 2001-230/230C |
In-Sight 2000-23M |
---|---|---|---|---|---|---|
X | X | |||||
X | X | |||||
X | X | X | X | |||
X | ||||||
X | ||||||
X | ||||||
X | X | X | X | |||
1Monochrome models only. 2Color models only. 3In-Sight 5.x.x and later firmware only. |
The Identification Tools are used to identify and verify 1D and 2D codes and symbols, alphanumeric text, pattern features and colors in the image.
Identification Tools | In-Sight Vision Systems (5.x.x and later firmware) |
In-Sight 2000-110 | In-Sight 2000-120/120C | In-Sight 2000-130/130C |
In-Sight 2000-230/230C In-Sight 2001-230/230C |
In-Sight 2000-23M |
---|---|---|---|---|---|---|
X | ||||||
X | ||||||
X | ||||||
X | ||||||
X | ||||||
X | X | |||||
X | ||||||
X | ||||||
X | X | |||||
X | ||||||
X | ||||||
1The Read ID Codes and Read Text tools are legacy tools and are not supported on systems running In-Sight Explorer 4.7.0 and later. 2In-Sight 5.x.x and later firmware only. 3Color models only. |
The Geometry Tools are used to create geometric references in the image, which can be utilized by other Inspection Tools, such as Math & Logic Tools and Measurement Tools.
Geometry Tools | In-Sight Vision Systems | In-Sight 2000-110 | In-Sight 2000-120/120C | In-Sight 2000-130/130C |
In-Sight 2000-230/230C In-Sight 2001-230/230C |
In-Sight 2000-23M |
---|---|---|---|---|---|---|
X | X | X | ||||
X | X | X | ||||
X | X | X | ||||
X | X | |||||
X | X | X | ||||
X | X | |||||
X | X | |||||
X | X | |||||
X | X | |||||
X | X | |||||
X | X | |||||
X | ||||||
X |
The Math & Logic Tools are used to conditionally link tools together based on tool and job data, perform mathematical operations on tool outputs, process statistics of tools, group tools together and create steps for the order of operation.
Math & Logic Tools | In-Sight Vision Systems | In-Sight 2000-110 | In-Sight 2000-120/120C | In-Sight 2000-130/130C |
In-Sight 2000-230/230C In-Sight 2001-230/230C |
In-Sight 2000-23M |
---|---|---|---|---|---|---|
X | X | X | ||||
X | X | X | X | X | X | |
X | X | |||||
X | X | |||||
X | X | X | X | |||
X | ||||||
X | X | |||||
X | X | X | ||||
Robot Guidance | X |
The Plot Tools are used to compute graphics in the image based upon mathematical expressions.
Plot Tools | In-Sight Vision Systems |
In-Sight 2000-110 | In-Sight 2000-120/120C | In-Sight 2000-130/130C |
In-Sight 2000-230/230C In-Sight 2001-230/230C |
In-Sight 2000-23M |
---|---|---|---|---|---|---|
X | X | X | ||||
X | X | X | ||||
X | X | X | ||||
X | X | X | ||||
X | X | X | ||||
X | X | X | ||||
X | X | X |
The Image Filter Tools are used to enhance an image or area of the image for further image analysis.
Image Filter Tools | In-Sight Vision Systems (5.x.x and later firmware) |
In-Sight 2000-110 | In-Sight 2000-120/120C | In-Sight 2000-130/130C |
In-Sight 2000-230/230C In-Sight 2001-230/230C |
In-Sight 2000-23M |
---|---|---|---|---|---|---|
X | X | |||||
X | ||||||
X | ||||||
X | ||||||
X | ||||||
1Supported only on In-Sight vision systems running firmware version 4.x.x. 2Color models only. |
The Defect Detection Tools are used to determine if a part or object was produced with a defect, such as a crack, crimp, dent, gap, nick or scratch.
The Calibration Tools are used to construct a calibration file that can be shared among jobs.
Calibration Tools | In-Sight Vision Systems |
In-Sight 2000-110 | In-Sight 2000-120/120C | In-Sight 2000-130/130C |
In-Sight 2000-230/230C In-Sight 2001-230/230C |
In-Sight 2000-23M |
---|---|---|---|---|---|---|
Robot | X | |||||
X | X | |||||
X |